A gas safety inspection is a systematic check of the entire gas system: the piping, the shutoffs, the appliance connectors, and the pressure the system actually holds. Gas Pros Inc. performs them across Hillsborough County for homeowners, buyers, and builders.
The most common reasons we get called: a buyer wants the gas system checked before closing, an owner wants the system verified after a renovation or appliance change, a permit needs a pressure test to close out, or something just seems off, a smell near the meter, an appliance that's acting up, or vegetation dying over a buried line.
What a gas safety inspection includes
We walk the whole system. Exposed piping is checked for corrosion and mechanical damage; every shutoff valve is exercised; appliance connectors and drip legs are verified; the meter or tank and its regulator are checked; and the piping is put on a gauge to confirm it holds pressure. At the end you get a written account of what was checked and what we found, anything unsafe, anything non-compliant, and anything that will need attention soon.
- Visual inspection of accessible piping for corrosion and damage
- Shutoff valve operation check at the meter and each appliance
- Appliance connector and drip leg verification
- Meter, tank, and regulator condition check
- Gauge pressure test of the piping system
- Leak check at fittings and appliance connections
- Written summary of findings and recommended next steps
What to expect
Most inspections are a single visit. The gas stays on while we do the visual walkthrough, then comes off briefly for the pressure test. Pilots are re-lit before we leave. If we find a problem, we show you exactly what and where it is, and quote the repair before anything happens.
Pressure testing for permits and inspections
When a job needs a pressure test for an inspector, a new line, a repair, a permit close-out, we provide it. The system is put on a gauge, the inspector witnesses the test, and you have documentation that the gas system held pressure. Homebuyers: this is the same test, done for you, before you own the problem.
Gas Safety Inspections — Common Questions
Does a gas line need a pressure test for inspection?
Yes. Permitted gas work requires a pressure test on a gauge, witnessed by the inspector, before the job is signed off. We put the system on the gauge before calling for inspection so the test passes the first time.
What does a gas safety inspection include?
A walkthrough of the whole system: piping condition, shutoff valves, appliance connectors, the meter or tank and regulator, and a gauge test of the piping. You receive a written summary of the findings.
How much does a gas pressure test cost in Tampa Bay?
It depends on the system size and what access requires. We quote after a quick conversation about the property, and the estimate is free.
When should I get a gas line inspection?
Common triggers: before buying a home, after a renovation that touched gas appliances, after adding or replacing an appliance, after storm or flood exposure, or any time something seems off, like a smell, a dying pilot, or dead vegetation over a buried line.
Do homebuyers need a gas inspection before closing?
It's a common and sensible request. A general home inspection covers gas broadly; a dedicated gas inspection pressure-tests the piping and checks the system the way a gas contractor sees it, before you own the problems.
Gas Pros Inc. inspects and pressure-tests gas systems across Hillsborough County, for buyers closing on a home and owners who want their system verified.